whichever not mentioned in Standard Accessories
MODEL | UMG 700 | UMG 850 | UMG 1100 | ||
---|---|---|---|---|---|
Work Table Size | 1350×300 | 1600×350 | 1900×400 | ||
Swivel of Table | ±45° | ±45° | ±45° | ||
T-Slot Nos. / Bolt Size | 3/ M16 | 3/ M16 | 5/ M16 | ||
T-Slot Centre Distance | 65 | 90 | 80 | ||
Distance From Spindle to Table max/min | 400-0 | 500-00 | 550-50 | ||
X-Longitudinal Table Travel | 700 | 850 | 1100 | ||
Y-Cross Table Travel | 225 | 325 | 450 | ||
Z-Knee Vertical Travel | 410 | 500 | 600 | ||
Table Loading Capacity in (kgms.) | 350 | 700 | 1200 | ||
FEEDS & RAPIDS IN X-Y-Z AXIS | |||||
No. of Feeds | 18 | 18 | 18 | ||
Range of Longitudinal Feed/min | 18 to 400 | 18 to 400 | 18 to 400 | ||
Range of Cross Feed /min | 18 to 400 | 18 to 400 | 18 to 400 | ||
Range of Vertical Feed /min | 2.5 to 62 | 2.5 to 62 | 2.5 to 62 | ||
No. Of Rapid Traverse | 2 | 2 | 2 | ||
Longitudinal Rapid Feeds / min | 900, 1500 | 900, 1500 | 900, 1500 | ||
Cross Rapid Feeds/ min | 900, 1500 | 900, 1500 | 900, 1500 | ||
Vertical Rapid Feeds/min | 147, 210 | 147, 210 | 147, 210 | ||
SPINDLE DETAILS | |||||
No of Spindle Speeds | 12 | 12 | 12 | ||
Range of Spindle Speeds (RPM) | 45-1120 | 45-1120 | 45-1120 | ||
Spindle Taper Standard | ISO 40 | ISO 40 | ISO 40 | ||
Arbour Diameter | 25.4 | 25.4 | 32 | ||
ELECTRICAL | |||||
Spindle Motor/ RPM’s | 3HP/ 1440 | 5 HP/ 1440 | 7.5 HP/1440 | ||
XYZ Axis Feed Motor | 2 HP | 2 HP | 3 HP | ||
Coolant Motor | 0.1 HP | 0.1 HP | 0.1 HP | ||
FLOOR & PACKING DIMENSIONS (APPROX.) | |||||
Overall Length | 2000 | 2050 | 2500 | ||
Overall Width | 1750 | 1950 | 2500 | ||
Overall Height | 1800 | 1880 | 2400 | ||
Net Weight kgms. | 2500 | 3500 | 4200 | ||
Gross Weight with Wooden Packing | 3500 | 4600 | 5500 |
Specifications of RAM TYPE HEAD:
Spindle Speeds - 9
Spindle Taper - ISO 40
Quill Travel Manual - 110 mm
Swivel RXL - 45 Degrees Either Side
Electric Motor - 2 HP 935 RPM's
Note:
1. Being committed to continual improvement, all specifications are subject to change without prior notice.
2. We always focus to do customization/ automation in machines as per our customer’s need.
3. Jig Fixtures, Tooling, Cutters & Inserts, Job Clamps etc. in buyer’s scope.
4. Final Inspection is mandatory once before despatch from our factory to avoid unsought advices.
Bhambar Automations Inc. is an ISO 9001 Certified Unit established & founded by Mr. Gurjeet Singh Bhambar as third generation enrolled in manufacturing of Bhambar Milling Machines. We are manufacturing the best quality Milling machines & Machining Solutions for our clients with Quality Assurance & Modern Automation. Our Research & Development team always effortful to make best productive milling machines by up-to-date Inventions for our clients.
Read More Bhambar Automations Inc
1011/1-A/1/3, Industrial Area -C, Surjeet Cinema Road, Dhandari Kalam, Ludhiana -141014 Punjab India .
+91-95014-00082, +91-90663-00082
E-mail:ceo@bhambar.com